Dr. Beemer Tech Day

Saturday, May 23, 2015
Planned by Ken Carson
8901 S. 1st,
Austin TX, 78748

(get directions)


Many of you have been waiting anxiously since last May, hoping for it, asking about it. Well wait no more! The 2015 Dr. Beemer Tech Day is now open for registration!

Saturday, May 23, from 9 am to 3 pm, Dr. Beemer (aka Brian McKinney) will open his shop’s doors to our chapter to work on our cars. We can do whatever we need to do…as long as it doesn’t take longer than two hours. Get caught up on the maintenance you’ve been putting off. Take care of those upgrades you’ve been planning for so long. You’ll have the benefit of a lift and a Dr. Beemer technician to guide you, but not do the work for you! ; )

Highlights:

· Time slots are 9-11am, 11am-1pm, and 1pm-3pm

· $20 gets you a lift, technical advice, and a raffle ticket

· Bring your own tools or if you need to use a technician’s tools, tip him/her accordingly

· 30% off OE and aftermarket parts ordered through Dr. Beemer

· If you already have your own parts, bring them…that’s ok, too!

· Catered lunch provided by Dr. Beemer beginning at 11am…eat around your work time

· Free swag from vendors

· Door prizes from raffle

· Visits from vendors demonstrating their products

What else to know:

· You must be a current BMW CCA member.

· Everyone must bring their own safety glasses (prescription eyeglasses are fine to wear without safety glasses).

· Additional raffle tickets are available for $5 each.

· Spots are available for paid alignments at 30% off.

· If the parts have to come from the dealership, it would be 10% off the parts. (This still may be less expensive than the BMW CCA discount of 15% off dealership parts retail at BMW of Austin).

· Dr. Beemer technicians will be available for advice and guidance. Members may bring their own tools or use a technician’s (tip required).

· You may tip your technician, even if you don’t use their tools. Remember, these guys are donating their day to us.


This is first come, first served. To get an estimate on labor time and parts costs for the work you need to do complete and submit the form below.

Dr. Beemer will confirm that your required work will fit into the time slot or make suggestions of what work will. They will then assign you a work slot. We will sign you up on the chapter website after notification from Dr. Beemer.